Airflow Network Settings
Under the Airflow Network settings, key inputs are available that enable the nomination of your model to be adapted from a standard energy model.
To use the Airflow Network, ensure the Network Control is enabled.
Availability
Rules
Rules are the logic which grant ventilation availability to your Space. You can have one or more Rule set per Space, controlled by a Schedule to assume the overall time in which these conditions are evaluated. The following Rules are available:
Zone Air Temperature
Hour
Zone Relative Humidity
Surface Types
Zone Occupancy
Zone Carbon Dioxide
Compare Temp. (1)
Site Relative Humidity
Compare Temp. (2)
Site Wind Speed
Compare RH (2)
Compare RH (1)
Site Wind Direction
Site Rain
Site Drybulb Temp.
Rule Examples
Each Rule has a subsequent list of inputs available to control the Rule. For example, where a Zone Air Temperature is selected, The Zone Air Temperature strategy and temperatures can be selected. In the example below, the Rule states that when the Zone Air Temperature is between a Max of 25 °C and a Min of 20 °C, associated Openings will be available to Open.
In this second example, Zone Carbon Dioxide has been added as an additional Rule. This Rule states that when the Zone Air Temperature is between a Max of 25 °C and a Min of 20 °C AND Zone Carbon Dioxide has a Max value of 1000 ppm, associated Openings will be available to Open.
Availability Schedules
Availability schedules control the overall time in which a Rule can be adopted. They can be set for specific periods of time, such as Design Days, Weekdays, etc. They come in two types, Availability and Openability. The Availability schedule allows a window to be opened each hour, by being either On or OFF. The Openability schedule ....
Openability
When ventilation is deemed to be available via a Rule, surfaces representing windows and doors can be opened via a Openability Schedule, the Zone Air Temperature or the Zone Thermostat.
Openability Schedules
Openability schedules control the overall time in which a Rule can be adopted. They can be set for specific periods of time, such as Design Days, Weekdays, etc. They come in two types, Availability and Openability. The Openability schedule allows a window to be opened each hour, by being either On or OFF.
Last updated
