Wall

Tested and verified, the Wall App is a powerful design tool for specifying and optimising residential and commercial wall systems to meet building code compliance.

Need H1 Energy Efficiency or Section J thermal bridging calculations? Looking for the best products—plus energy, moisture, and upfront carbon insights—all in one place? Then the Wall App is for you.

Products + templates

Design walls with trusted and verified supplier data. Start fast with a supplier or generic templates. Or start from scratch.

• Select a Template

• Build a Template

• Add And Delete A Material

• Change A Generic Material Thickness

• Moving A Material Layer

• Adjust An Air Cavity

• Adjust Surface Emissivity

Thermal bridging

Thermal bridging for repeating structural framing can be adjusted for its contribution to thermal performance. Our simulations are building code specific (AS/NZ 4859.2, NZS 4214 or ISO 6946).

• Wall Height

• Edit Framing

• Noggin Distribution

• Horizontal Spacing

• Frame Depth

• Stud Material Selection

• Add A Thermal Break

• Point Thermal Bridging

Moisture

Powered by EnergyPlus, simulate moisture assessments against DA07/ASHRAE 160 requirements for AU / NZ building code compliance. ‍

• Study

• Model Inputs

• Internal Conditions

• Step by Step Example

Carbon

Simulate upfront and operational life cycle assessments using our embedded product databases (BRANZ, EPiC, Building Transparency and ICE) for your Walls Systems in seconds.

• Scope and Boundaries

• Products (A1 - A3)

• Construction (A4 - A5)

• Replacement (B4)

• End-of-Use (C1 - C4)