LogoLogo
🎚️ Updates👋🏽 Book a Demo🎫 Get Support🖊️ Sign-up
  • 👋Basics
    • Welcome
    • Get Started
      • Sign-up
        • Single Sign-On (SSO)
      • Create a Team
      • Create a Project
      • Create a Design
      • Grab a 7-day Trial
      • Plans
        • Community Plan
        • Essentials Plan
        • Practice Plan
        • Enterprise Plan
        • Education Plan
        • Suppliers Plan
        • Credits
        • Offers
          • Sculptform Offer
    • Get Support
      • Applications
        • Building
        • Wall
        • Floors and Subfloors
        • Roof
      • Support Tickets
      • On-demand Courses
        • Geometry
        • H1 AS1 & VM1
        • NCC 2022: J1V3
        • Moisture
        • Themes
        • Daylight
        • DTS Façade Calcs
        • Total R-values
        • NCC 2022: J1V5
        • Part J4 Building Fabric
        • 3D Geometry in SketchUp
        • H1 VM2
        • BESS: Daylight Access
        • DQLS: Daylight Modelling
        • HVAC Sizing
        • Dew Point
        • Green Star: Daylight
        • CIBSE TM59
        • G7 Natural Light
        • Advanced Shading
        • IDF Exports and Imports
        • 2D to 3D Specification
      • Project Support
      • Testing and Verification
        • EnergyPlus™ V 9.5.0 + 22.2
          • Input Output Reference
          • Engineering Reference
          • ANSI/ASHRAE Standard 140
        • Radiance V 5.2
        • Total R-value Calculations (AS/NZ 4859.2 + NZS 4214)
        • System Total R-value Calculations (CIBSE Guide A)
      • Updates
      • FAQ's
        • Design & Specification
          • Acoustic
            • Sound Pressure, Frequency and Density
            • Weighted Sound Reduction Index Rw
            • Insulation and Density
            • Acoustic Glazing
          • Climate
            • AU Climate Zones
            • The Koppen Climate Classification System
            • NIWA Weather Files
          • Comfort
          • Complaince
            • Performance-Based Design Briefs
          • Materials
            • Control Layers
            • Material Definitions
            • Material Groups
            • Vapour Resistance
            • Surface Emissivity
            • Concrete in Construction
            • Efflorescence in Masonry
            • Glazing - Types
            • Glazing – Technology and Surface Treatments
            • Glazing - Low-E Coatings
            • Framing - Thermally Broken Frames
            • Emerging Technologies - Wall Products and Systems
            • Emerging Technologies - Glazing Products and Systems
            • Glazing - Safety and Defects
            • Pliable Membranes
            • Insulation - Open Cell
            • Insulation - Closed Cell
            • Façade Systems
            • Rigid Air Barriers
        • Data And Security
        • Plans and Trials
        • Training and Workshops
        • Supplier Products
        • Billing
        • Other
  • 📘User Manual
    • Settings
      • Account Management
        • Upgrade Account
        • Update Payment Details
        • Update Profile
        • Add a Team Member
        • Delete A Team Member
        • Purchase Credits
        • Create a Theme
        • Cancel your Plan
      • Project Management
        • Copy a Project
        • Team Activity
        • Update A Project
        • Invite a Guest to a Project
        • Copy a Design to Another Project
        • Copy a Design
        • Delete a Design
        • Delete a Project
        • Delete a Team Member
        • Delete a Team
    • Wall, Roof and Floor
      • Materials
        • Select a Layout
        • Add a Material
        • Move a Material
        • Delete a Material
        • Change Material Properties
        • Adjust Insulation for Compression
        • Adjust an Air Cavity
        • Add A Thermal Break
        • Adjust Surface Emissivity
        • Add / Edit Framing
      • Module Settings
        • Total Height
        • Contact Resistance
        • Cavity Bridging
    • Building
      • Drawing
        • Import A Drawing Underlay
        • Edit Grid Settings
        • Hide Tags & Check Points
        • Flip Geometry
        • Calibrate A Drawing
        • Controlling Layers
        • Building Rotation
        • Set An Origin
        • Draw A Zone
        • Split A Zone
        • Locate Coordinates
        • Review Zones and Aspects
        • 3D View
        • Set A Zone Height
        • Define A Zones Purpose
        • Edit A Zone
        • Use Tagging
        • Duplicate Drawings
        • Matching Underlays
        • Filter Aspects
        • Filter Zones
      • Building
        • Levels
          • Add a Level
          • Duplicate a Level
          • Edit a Level
          • Add a Roof
          • Add a Daylight Grid
          • Add Shading
          • Specify a Roof
          • Add Roof Glazing
          • Add Custom Eaves
          • Project a Roof
          • Draw a Skylight
          • Specify a Skylight
        • Groups
        • Spaces
          • Create a Space
          • Update a Schedule
          • Update a Building Class
          • Add Occupants
          • Add Equipment Loads
          • Add Lighting Loads
          • Set Infiltration
          • Set Thermostats
          • Add HVAC
          • Set Sizing
        • HVAC
          • Add Plant HVAC
            • Air Handling Unit
              • Supply Air Fan
              • Return Air Fan
              • Outside Air System
              • Heating Coil
              • Cooling Coil
            • Chilled Water Loop
              • Chiller (Air Cooled)
              • Chiller (Water Cooled)
              • Four Pipe Heat Pump (Cooling)
            • Condenser Water Loop
              • Auxiliary Condenser Water Loop
              • Cooling Tower
            • Four Pipe Heat Pump
            • Hot Water Loop
              • Heating Device - Gas Boiler
              • Heating Device – Air Source Heat Pump
              • Heating Device – Four Pipe Heat Pump (Heating)
            • VRF Condenser Unit (Air Cooled)
            • Constant Air Volume System (Air Cooled)
            • Fan Coil Unit System (Air Cooled)
            • Variable Air Volume System (Air Cooled)
            • VRF Condenser Unit
          • Add Space HVAC
            • Air Terminal
              • Heating Coil
            • Fan Coil Unit
              • Cooling Coil
              • Heating Coil
              • Air Loop
            • Packaged Terminal Heat Pump (Split System)
              • Supply Air Fan
              • Heating Coil
              • Cooling Coil
            • VRF Terminal Unit
              • Air Loop
            • Constant Air Volume System (Air Cooled)
            • Fan Coil Unit System
            • Variable Air Volume System (Air Cooled)
            • Variable Refrigerant Flow
          • Select HVAC Templates
            • Fan Coil Unit - Air Cooled (EnergyPlus HVACTemplate)
            • Packaged Variable Air Volume (EnergyPlus HVACTemplate)
            • Packaged Constant Air Volume (EnergyPlus HVACTemplate)
            • Variable Refrigerant Flow (EnergyPlus HVACTemplate)
            • Central Plant and Air Handling System
            • Fan Coil Unit System (Electric Heating)
            • Fan Coil Unit System (Water Heating)
            • Four Pipe Heat Pump System
            • Variable Refrigerant Flow
            • Variable Refrigerant Flow (incl. Outside Air)
            • Water-cooled Package Unit
        • Shading
          • Add Extruded Form
          • Edit Shading
          • Surface Customisation
        • Renewables
          • Add Solar
          • Edit Solar
          • Add Renewable Energy
        • Modelling
          • Simulation
          • Site
          • Zones
          • Reporting
        • Reference Building
          • J1V3
          • V 2.6.2.2
          • H1 / VM1
      • Envelope
        • Walls
        • Roofs
        • Floors
        • Windows
        • Skylights
        • Glazed Doors
        • Opaque Doors
        • Shading
          • Add Local Shading
      • Building FAQ
        • Calculate Discharge Coefficients
        • J1V3 Reference Building - Control Thermostat
        • H1/VM1 - Infiltration and Ventilation
        • Accessing Designer Mode
        • Combining Zones
        • Adding a Skillion Roof or Sloping Ceiling
        • How do I model a Curtain Wall Spandrel?
        • Weather Data Sources
        • Create a Custom Location
    • Workflows
      • Energy Efficiency
        • H1/AS1
        • H1/AS2
        • H1/VM1
        • Part J4 Building fabric
          • J4D3 Thermal construction — general
          • J4D4 Roof and Ceiling Construction
          • J4D5 Roof Lights
          • J4D6 Walls and glazing
            • NCC 2019 Façade Calculator and Speckel
            • Specification 37
          • J4D7 Floors
        • J1V3 Verification using a reference building
        • J1V5 Verification using a reference building for a Class 2 sole-occupancy unit
          • J1P2 Performance Requirements
          • J1P3 Performance Requirements
          • J1V5 HVAC Schedules
          • J1V5 Lighting Schedules
          • J1V5 Occupancy Schedules
          • J1V5 Cooking and Appliance Schedules
          • J1V5 Internal Heat Loads
          • J1V5 Air-conditioning Setpoints
          • J1V5 Natural Ventilation Requirements
        • V2.6.2.2 Verification using a reference building
          • V2.6.2.2 Method
          • Support Materials
        • Total R-values
        • Advanced HVAC
          • Zone Control Thermostat
          • EnergyPlus Sizing Calculations
          • Demand-controlled ventilation
          • Outdoor air reset-based controls
          • Modelling four-pipe heat pumps
          • Modelling a fixed minimum air flow rate on AHUs/VAVs
          • Customise fan performance curves
          • Customise chiller performance curves
          • Design Day Weather Overview
          • Modelling air source heat pumps
          • Green Star: Reference HVAC System Type 3
          • Advanced HVAC: Typical VAV System
          • Design Day Weather Overview
          • Customise chiller performance curves
          • Customise fan performance curves
          • Modelling a fixed minimum air flow rate on AHUs/VAVs
          • Modelling four-pipe heat pumps
          • Outdoor air reset-based controls
          • Demand-controlled ventilation
          • EnergyPlus Sizing Calculations
          • Zone Control Thermostat
          • Modelling air source heat pumps
        • Energy and Thermal FAQ's
          • Thermal Comfort - PMV
          • Thermal Comfort - CBE Model
          • Total R-value
          • Solar Control
          • VRF Modeling in EnergyPlus
          • Thermal Bridging - The Basics
          • Colour
      • Daylight
        • Grid
        • Surfaces
        • Simulation Settings
        • G7/VM1
        • Green Star
        • BESS
          • Daylight Access - Living Areas
          • Daylight Access - Bedrooms
          • Winter Sunlight
        • Daylight FAQ's
          • Metrics
          • Daylight Design - Introduction
          • Daylight Design - Glazing
      • Moisture
        • Scope
          • Objective
        • Model
        • Internal Conditions
        • External Conditions
        • Moisture FAQ's
          • Wind-driven Rain?
          • Hygrothermal Convergence Errors
          • Hygrothermal Weather Data Sources?
          • Hygrothermal Material Data
          • ASHRAE Fundamentals Cavity Ventilation
          • Mould Growth Index
          • NCC 2022 Condensation Management Requirements
          • Vapour Conversions
          • HAMT FAQ
          • Can I Model a Curtain Wall Spandrel with HAMT?
      • Dew Point
        • External Conditions
        • Internal Conditions
        • Layers
      • Carbon
        • Scope and Boundaries
        • Products (A1 - A3)
        • Construction (A4 - A5)
        • In-Use (B4)
        • End-of-Use (C2)
        • Carbon FAQ's
          • Embodied Energy - Introduction
          • System Boundaries (EN 15978)
          • Material Database
          • Upfront Carbon Emissions - Transport to Site (Module A4)
          • BRANZ CO₂NSTRUCT (V2.0)
          • Database (Customised)
          • AusLCI (V1.38) Construction Carbon Emissions Factors V1Untitled
          • Life Cycle Assessment - Resources
      • Design Day
        • Settings
        • Design Day Reports
      • Designer Mode
        • Airflow Networks
          • Airflow Network Setup
          • Model Settings
          • Airflow Network Settings
            • Ventilation
          • Window Settings
          • Airflow Networks Definitions
        • CIBSE TM59
          • CIBSE TM59 Setup
  • ⏺️Recordings
    • Webinars
      • Specification 44
      • 3D Modelling
      • Part J4 Building Fabric
      • H1 Energy Efficiency: Design out Overheating with the Modelling Method
      • J1V5: The New Multi-Residential Compliance Pathway
      • NCC Shading Algorithms: Updates and Improvements
      • TM59: Design Methodology for Overheating Risk in Homes
      • Airflow Networks: J1V5, TM59 and Natural Ventilation
      • Moisture Management Updates
      • H1 Energy Efficiency Verification Methods
      • Designer Mode: Go Beyond Compliance
      • Community Plan Upgrade
      • Major Feature Release: Verification Method V2.6.2.2
      • H1 Compliance in 45 minutes: Buildings greater than 300 m2
      • H1 Compliance in 45 minutes: Housing and buildings up to 300 m2
      • Advanced HVAC Feature Overview
      • Designing for Embodied Carbon: Building for Climate Change
      • Designing for Natural Light: G7VM1 DQLS and HC5 Natural Light
      • Speckel 2.0 Release: From Compliance to Green Star
      • J1V5: A solution for flexible design or a race to the bottom?
      • NCC 2022: What's Coming This May
      • Advanced HVAC: Testing and Case Studies
      • Daylight Modelling: Planning to Rating Tools
      • Energy Plus 22.2.0: Testing and Verification
      • Life Cycle (Carbon) Assessments: Testing and Case Studies
      • H1 Energy Efficiency: From Schedule to Verification
      • H1 Energy Efficiency: Multi-unit Dwellings
    • Tutorials
      • New Spaces Release
      • Storey Height Update
      • 2D Selection Tool
      • Support Tickets
      • OpenStudio SketchUp Plug-in
      • Pollination Rhino Plug-in
      • Add Clerestory Glazing to Your roof
      • Colour Scheme Hack
      • Daylight Results - An Overview
      • G7 Natural Light Verification Method G7/VM1
      • H1: Admin and Reporting
      • NCC 2022: Shading Multipliers
      • Materials: Create Your Own
      • Daylight / Natural Light Upgrade: G7, BESS & Green Star
      • BESS Daylight Access
      • G7 Grids: A Practical Example
      • Glazing: Multiple Windows Per Aspect
      • Wall Assessments: Thermal, Carbon
      • Roof Systems: Cold, Warm and Hybrid
      • Ceiling Heights: A Practical Example
      • Default Fabric: Setting Common Glazing
      • Drawing Zones: Locking Against X and Y Axis
      • Tagging (Advanced): Create, Administer and Apply
      • Exports: Copy Tables, Images and Data
      • H1 Energy Efficiency - Multi-unit Dwellings
      • Tempered Zoning: Shifting the Thermal Line
      • Air Boundary: A Practical Example
      • External Doors: Residential + Commercial
  • 🤲Other
    • Platform Agreement
Powered by GitBook
On this page
  • 1. TERMS OF USE
  • 1.1 Introduction
  • 1.2 Account Creation
  • 1.3 Amendment of Terms
  • 1.4 Limitation of Liability
  • 1.5 Consumer Protection
  • 1.6 Age Requirement
  • 1.7 Returns and Refunds
  • 1.8 Third-Party Links
  • 2. DISCLAIMER
  • 2.1 General Information Disclaimer
  • 2.2 Limitation of Liability
  • 2.3 Third-Party Websites
  • 2.4 Website Availability
  • 2.5 Personalised Advice
  • 2.6 Advertiser Disclaimer
  • 3. PRIVACY POLICY
  • 3.1 Introduction
  • 3.2 Information Collection
  • 3.3 Data Usage
  • 3.4 Data Security
  • 3.5 Cookies and Tracking
  • 3.6 Third-Party Sharing
  • 3.7 Data Retention
  • 3.8 International Transfers
  • 3.9 Changes to Privacy Policy
  • 4. CONTACT INFORMATION
  • 5. ACCEPTANCE OF TERMS

Was this helpful?

  1. Other

Platform Agreement

1. TERMS OF USE

1.1 Introduction

By continuing to browse and use our platform and this website (the "Site"), you, the user ("You"), agree to comply with and be bound by these terms and conditions, including our Privacy Policy and Website Disclaimer. This Agreement governs the relationship between Speckel Pty Ltd ("Speckel," "We," "Our," or "Us") and You.

1.2 Account Creation

To access certain features of the Site, you may be required to create an account. Accounts associated with personal or administrative email addresses, including but not limited to Outlook, Gmail, Xtra, Hotmail, QQ, or similar, may be automatically or manually deleted if deemed suspicious or invalid.

1.3 Amendment of Terms

Speckel reserves the right to modify, update, or amend these terms at any time. You agree to review these terms periodically. Continued use of the Site constitutes acceptance of any changes to these terms.

1.4 Limitation of Liability

Speckel is not responsible for any loss or damage incurred from the use of the Site, including errors or omissions in information, reliance on third-party content, or issues arising from digital products and services provided on the Site. Use of the Site is at your own risk.

1.5 Consumer Protection

In accordance with the Australian Consumer Law (Competition and Consumer Act 2010, Schedule 2), Speckel’s liability is limited to re-supplying the goods or services, replacing the goods, or refunding the cost of those goods or services.

1.6 Age Requirement

You must be at least 18 years of age to use this website and make any purchases. Use of the Site by minors is not permitted.

1.7 Returns and Refunds

Returns are handled according to Australian Consumer Protection legislation. Requests for returns must be made within 10 days of purchase, and refunds will be processed via the original payment method, at Speckel’s discretion.

1.8 Third-Party Links

The Site may contain links to third-party websites. Speckel does not endorse, sponsor, or take responsibility for the content of those sites. You access third-party sites at your own risk.


2. DISCLAIMER

2.1 General Information Disclaimer

The content provided on the Site is for informational purposes only. While Speckel strives to ensure the accuracy of the information, it makes no representations or warranties regarding the completeness, reliability, or suitability of the information, services, or products offered.

2.2 Limitation of Liability

Speckel shall not be liable for any loss, damages, or claims arising from the use of the Site, including but not limited to direct, indirect, incidental, or consequential damages. This includes any damages resulting from the use of third-party products, services, or advertisements accessed through the Site.

2.3 Third-Party Websites

The Site may contain links to third-party websites. Speckel does not control the content, availability, or accuracy of these websites, and the inclusion of links does not imply endorsement or approval. You access these sites at your own risk.

2.4 Website Availability

Speckel makes reasonable efforts to ensure the Site is available. However, it does not guarantee continuous availability and will not be held responsible for temporary downtime or technical issues beyond its control.

2.5 Personalised Advice

The information on the Site is general and should not be construed as personal advice. Speckel does not take responsibility for any personal decisions made based on the information provided.

2.6 Advertiser Disclaimer

Speckel makes no warranties regarding the advertisers on the Site or the products or services they offer. Any interaction with advertisers is solely between you and the advertiser, and Speckel shall not be held responsible for any damages incurred.


3. PRIVACY POLICY

3.1 Introduction

3.2 Information Collection

Speckel collects personal information, including but not limited to name, email address, billing details, geographic location, and payment information, in order to provide services. We may also collect non-personally identifiable information for analytical purposes.

3.3 Data Usage

We use your personal data to provide services, communicate with you, process payments, and send marketing communications if you have subscribed. You may opt out of marketing communications at any time.

3.4 Data Security

Speckel employs industry-standard security measures to protect your data:

  • Authentication is managed via Auth0 with optional Two-Factor Authentication (2FA) for enhanced security.

  • User data is protected under our Privacy Policy and applicable privacy laws.

  • Daily platform-wide backups are performed to minimise data loss.

  • Speckel Support may access project/design data only upon written request submitted through our ticket system.

Despite our best efforts, no security system is completely impenetrable, and Speckel cannot guarantee the absolute security of your personal information.

3.5 Cookies and Tracking

The Site uses cookies to enhance user experience, analyze website traffic, and deliver relevant ads through third-party services. You may disable cookies through your browser settings, although this may affect the Site's functionality.

3.6 Third-Party Sharing

Speckel does not sell or rent your personal data. We may share it with third-party service providers who help deliver services to you, in accordance with applicable laws and privacy standards.

3.7 Data Retention

We retain your personal data as long as necessary to fulfill our legal obligations or provide services. If your data is compromised, we will notify you promptly in accordance with the applicable law.

3.8 International Transfers

Your personal data may be transferred across borders for storage and processing in countries outside Australia. These transfers will occur only to countries with adequate privacy protections.

3.9 Changes to Privacy Policy

Speckel may update this Privacy Policy from time to time. All changes will be effective immediately upon posting. We encourage you to review this policy periodically to stay informed.


4. CONTACT INFORMATION

If you have any questions regarding these Terms of Use, Privacy Policy, or Disclaimer, please contact Speckel at:


5. ACCEPTANCE OF TERMS

By using the Site, you acknowledge that you have read, understood, and agreed to the Terms of Use, Disclaimer, and Privacy Policy outlined herein. If you do not agree with these terms, you must immediately cease using the Site.

PreviousExternal Doors: Residential + Commercial

Last updated 6 days ago

Was this helpful?

Speckel respects the privacy and confidentiality of your personal information and adheres to the . This Privacy Policy outlines how we collect, use, and protect your personal data.

Email:

🤲
Australian Privacy Principles
support@speckel.io